info@dawnfloors.com
You are here: Home » Products » All Steel Raised Access Floor » Anti-Static Steel Raised Access Flooring With Ceramic Finish

ANTI-STATIC STEEL RAISED ACCESS FLOORING WITH CERAMIC FINISH

LINE3
Anti-static raised access flooring with ceramic finish is a type of flooring that is specially designed to provide electrostatic discharge (ESD) protection in data centers and other sensitive electronic environments. It consists of a steel panel with a ceramic finish that is applied to the surface to provide a conductive path for static electricity to dissipate.The ceramic finish provides excellent wear resistance and durability, making it ideal for high-traffic areas. It is also easy to clean and maintain, which is essential in data centers where cleanliness is critical.

In addition to its anti-static properties, the ceramic finish provides an aesthetically pleasing look and can be customized to match the design of the data center. The raised access flooring allows for easy cable management and provides ample space for air circulation, helping to regulate the temperature and humidity in the data center.

Anti-static raised access flooring with ceramic finish is an excellent choice for data centers and other sensitive electronic environments that require both ESD protection and durability.These panels are non-combustible and adhere to Dawn standards as tested by CISCA.

SYSTEM PERFORMANCE CRITERIA

LINE3
System performance criteria are the most important to consider because they represent the performance in a typical installation. Panel only criteria such as concentrated load is often used to specify floor systems however, the test is not representative of an actual installation because it is performed with the panel testing blocks, not actual understructure.
  System Performance Criteria
System Type Static Loads Rolling Loads
   Panel Panel Size Concentrated
Load		 Safety Factor
(min.2.0)		 Ultimated load 10 Passes 10,000 Passes
   FS800 602x602x40mm 368kg/800lbs Pass 736kg/1600lbs 318kg
700lbs		 275kg
600lbs
   FS1000 602x602x40mm  454kg/1000lbs Pass 909kg/2000lbs 368kg
800lbs		 318kg
700lbs
*A tests are performed using CISCA's Recommend Test Procedures for Access Floors with the exception of Design Load
1. Design load is tested using CISCA Concentrated Load test method on actual understructure instead of steel blocks. Design load is determined by taking the lesser value of ultimate load divided by two or the point at which permanent damage begins to occur (yield point).
2. Safety factor is the multiple of Design load to the Ultimate Load. International standards and Dawn Modular Floor recommend' a minium of 2.

UNDERSTRUCTURE OPTIONS

LINE3
  • Standard-FH-Pedestal-(OD22
    Standard FH Pedestal
    (OD22.3x1.5mm tube)
  • Standard-Stringer (1
    Standard Stringer
    (1.0mm thickness)

FINISH OPTIONS

LINE3
  • 6022
     
    6022
  • 6001
     
    6001
  • 6021
     
    6021
  • 6023
     
    6023
  • 6025
     
    6025
  • 6026
     
    6026
  • 6027
     
    6027
  • 6031
     
    6031

INSTALLATION

LINE3
The finished access floor wil be rigid, free from vibration and rocking panels within a 3mm level over the entire space. Panels will be accurately cut to fit around all permanent features. All whole panels will be completely interchangeable allowing for any future changes. The access foor will maintain these origina conditions when sufficient panels have been removed for normal underfloor access.

ADVANTAGES

LINE3
● Electrostatic Discharge Protection: Anti-static ceramic finish prevents the buildup of static electricity, which can damage sensitive electronic equipment in data centers. This helps to protect the data center's equipment from electrostatic discharge (ESD).
● Durable and Long-Lasting: The ceramic finish provides excellent durability and long-term performance, making it ideal for use in high-traffic areas.
● Easy to Clean: The ceramic finish is easy to clean and maintain, making it a low-maintenance option for data centers and other facilities.
● Chemical Resistant: The ceramic finish is resistant to chemicals, making it ideal for use in facilities that require chemical cleaning or that handle hazardous materials.
● Customizable Design: Anti-static raised access flooring with ceramic finish is available in a range of finishes and colors, allowing for customizable design options that can complement the aesthetics of the data center or facility.
● Improved Aesthetics: The ceramic finish can add a sleek and professional look to the facility, helping to create a more welcoming and attractive environment for employees and visitors.

NEED TO TALK? WE'RE HERE FOR YOU.

LINE4
There's a lot to consider when it comes to ordering access floor. Let us know what you're looking for, and we'll help you determine which access floor options are best for your needs.

WE ARE WORKING WITH

LINE3
microsoft
Google
apple
schneider
3C
samsung
infineon
BMW
HUAWEI
facebook
zgjy

RELATED PRODUCTS

LINE3

FAQ

LINE3

Products

Solution

Quick Links

Contact Information
    info@dawnfloors.com
   +86-13861250682
    No.4 Wuqing Road, Henglin Town, Wujin District, Changzhou City, Jiangsu Province, China
© COPYRIGHT 2023 DAWN MODULAR FLOOR ALL RIGHTS RESERVED.